A 10-pack of 2-foot InvisiLED PRO tape light sections in 3000K soft white - a low-profile LED strip for under-cabinet, cove, and accent lighting where you want even light without visible hardware.
InvisiLED PRO is a silicone-cased LED tape with 3M construction adhesive on the back, so it mounts directly to clean, flat surfaces and disappears into the run. LEDs are spaced every 1 inch on center for smooth, even output with no hot spots. Each 2-foot section draws 3.0 watts per foot and produces 200 lumens per foot, and the run can be field-cut every 2 inches at the end to fit your exact length.
Best for
- Under-cabinet kitchen task lighting where a slim, hidden strip is preferred over a visible fixture
- Cove and toe-kick accent lighting in living rooms, bedrooms, and stairways
- Display cases, shelving, and retail or gallery accent runs
- Damp interior locations such as bathrooms and covered porches (rated for damp use)
- Projects needing a cuttable, linkable run from 1 ft up to 33 ft
Not ideal for
- Wet locations or direct-exposure outdoor areas - this tape is rated for damp use only
- Applications needing a finished fixture look - this is bare tape and requires a clean mounting surface
- Runs longer than 33 ft without additional power or a new run
How bright is it?
200 lumens per foot - roughly equivalent to a 25W incandescent bulb per foot. A typical 10 ft run produces about 2,000 lumens, enough for under-cabinet task lighting or cove accent, but not a substitute for a primary room light.
Light color and feel
3000K soft white - a warm, slightly golden tone similar to halogen. CRI 85 renders colors well for kitchens and displays. Dimmable with an electronic low voltage (ELV) dimmer.
Sizing and fit
Each section is 2 ft long; the 10-pack covers 20 ft total. Minimum run length is 1 ft and maximum is 33 ft. Tape may be field cut every 2 inches at the end of a run. Sections measure W 3 in x D 4 in x H 2 in per pack.
Specifications
- InvisiLED PRO 3000K
- 12 LEDs per foot, evenly spaced every 1 in on center
- Silicone cased tape with 3M construction adhesive
- Low power consumption with high lumen output
- Minimum run length 1 ft; maximum 33 ft
- May be field cut every 2 in at the end of a run
- May be dimmed with electronic low voltage (ELV) dimmer
- 50,000 hour rated life
- Max wattage: 3.0 per foot
- Bulb type: LED (spaced every 1 in)
- Lamp base: integrated LED module
- Lamp voltage: 24V
- Lumens: 200.0 per foot
- Efficacy: 66.7 lm/W
- Color temp: 3000K
- Color rendering index: 85
- Estimated life: 50,000 hours
- Part of the InvisiLED collection
- UL/ETL listed
- For damp use
- Warranty: 5 years
- Item weight: 0.19 lb
Frequently asked
Is the power supply included? No - a 24V driver is required and sold separately.
Is it dimmable, and what dimmer should I use? Yes, with an electronic low voltage (ELV) dimmer.
Can I install this in a bathroom or outdoors? It is rated for damp use, so bathrooms and covered porches are fine; wet or exposed outdoor locations are not.
What's the warranty? 5 years.
Can I cut the tape to length? Yes - field cut every 2 inches at the end of a run.
Ships from our warehouse in 1-4 Business Days