
A 60W remote power supply for WAC Lighting Basics and Gemini tape light systems, housed in a black steel enclosure.
This Class 2 enclosed transformer converts 120-277VAC line voltage to 24VDC for low-voltage tape lighting. The steel enclosure has knockouts with clips for line voltage wiring and a removable cover for service access. A 1W minimum load supports low-load LED systems, and the 72-inch lead wire gives flexibility for remote mounting. It is designed for hardwired installation on a ceiling or wall.
Best for
- Under-cabinet and cove lighting runs using WAC Basics or Gemini tape light
- Residential or light commercial installations that need a remote, hardwired 24VDC supply
- Projects requiring dimming via 0-10V, ELV, or TRIAC controls
- Damp interior locations such as bathrooms and covered porches (IP20 rated)
- Low-load LED runs - the 1W minimum load prevents flicker on small systems
Not ideal for
- Wet locations or direct water exposure - rated IP20 for damp locations only
- Plug-in or portable use - this is a hardwired unit
- Tape light systems from other brands without checking voltage and connector compatibility
How bright is it?
This is a power supply, not a light source - brightness depends on the tape light and total wattage connected. It supports up to 60W of 24VDC load.
Light color and feel
Not applicable - the power supply does not emit light. Color temperature is determined by the connected tape light.
Sizing and fit
Measures 7.4 in long x 3.62 in wide x 1 in high. The low-profile steel enclosure fits in cabinets, soffits, or utility spaces. Includes a 72-inch lead wire; longer leads (T24-BS-EX2) are sold separately.
Specifications
- Fully enclosed remote power supply with knockouts and clips for line voltage wiring
- Soft start, short circuit, and overload protection
- For use with WAC Lighting Basics and Gemini tape light systems
- 1W minimum load supports low-load LED systems
- Class 2 transformer - no greater than 5 amps per compartment
- Secondary wiring does not require conduit or clamp wiring techniques
- Input: 120-277VAC; Output: 24VDC; 60W
- Dimmable with 0-10V, ELV, and TRIAC dimmers (install dimmer on primary side)
- UL and cUL listed, IP20 rated for damp locations
- Finish: Black; Material: Steel; Style: Functional
- Collection: Basics & Gemini; Product Type: Power Supply
- Warranty: 5 years functional
- Hardwired; Mounts to ceiling or wall
- Overall dimensions: 7.4 in L x 3.62 in W x 1 in H; 72 in wire length
Frequently asked
What is it made of? A steel enclosure with a black finish.
Where in the home does this work best? Inside cabinets, soffits, or utility spaces near under-cabinet, cove, or accent tape light runs.
How is it mounted or assembled? Hardwired to line voltage and mounted to a ceiling or wall; knockouts and clips are provided for wiring.
What's the warranty? 5 years functional.
Can I use this with any tape light? It is designed for WAC Lighting Basics and Gemini 24VDC tape light. Check voltage and connector compatibility before pairing with other brands.
Ships from our warehouse in 1-4 Business Days