A two-light bath vanity in satin brass with satin white glass cylinders, inspired by Modernist architect Edward Dart and sized for a single vanity.
The Dart collection takes straight-line steel frames, finishes them in satin brass, and caps each end with an angled turn that echoes the minimalist geometry of mid-century Modernist architecture. Two satin white glass cylinders sit on the frame and cast light up and down, so the wall behind your mirror glows instead of glaring. It is a clean, architectural look that suits a renovated bathroom without shouting for attention.
Best for
- Bathrooms with a single 24-36 in vanity, mounted above or beside the mirror
- Powder rooms where you want a warm, even wash of light over the sink
- Modernist, mid-century, and contemporary interiors with brass or warm metal accents
- Hallways or dressing areas used as a secondary accent light
Not ideal for
- Large primary bathrooms that need a single bright light source - two 60W bulbs give accent-level light, not room-filling illumination
- Spaces where you want a shaded, traditional look - this is an exposed-cylinder, architectural design
- Installations on very low ceilings where the 5.75 in extension would crowd the mirror
How bright is it?
Brightness depends on the bulbs you choose. With two 60W-equivalent E26 bulbs you get roughly 1600 lumens total - enough to light a vanity area and the wall around it, but not a substitute for a primary ceiling light in a large bathroom.
Light color and feel
Color temperature is set by your bulbs, not the fixture. Warm white (2700-3000K) bulbs flatter skin tones and pair well with the satin brass finish; the satin white glass diffuses the light so it reads soft rather than harsh. The fixture is not listed as dimmable in the source specs, so plan on a standard wall switch unless your electrician confirms otherwise.
Sizing and fit
Overall 12.5 in wide x 5.75 in deep x 7.75 in high, with a 5.75 in extension from the wall and a 5.5 x 4.75 in backplate. The compact width suits a single-sink vanity; the 30-degree slope allowance means it can be mounted on a sloped ceiling or angled wall application. Shade height is 6 in.
Specifications
- Part of the Dart Collection
- Finish: Satin Brass
- Made of Steel, Glass
- Shade Made of Glass
- Glass: Satin White
- Slope: 30
- (2) 60W E26 Medium Incandescent Bulb(s)
- Bulb(s) Not Included
- Input Voltage: 120V
- Output Voltage: 120V
- Length of Electrical Wire: 8
- Lighting Direction: Up/Down
- Safety Rating: Damp
- Warranty Info: 1
- Overall Dimensions: 5.75 in (L) x 12.5 in (W) x 7.75 in (H)
- Extension: 5.75 in
- Shade Height: 6 in
- Backplate Dimensions: 5.5 in (W) x 4.75 in (H)
- Item Weight: 3.15 lbs
Frequently asked
Is the bulb included? No - bulbs are not included. You will need two E26 medium-base bulbs, up to 60W each.
Is it dimmable, and what dimmer should I use? The source specs do not list this fixture as dimmable. If you want dimming, confirm compatibility with your electrician before installing a dimmer.
Can I install this in a bathroom or outdoors? It carries a Damp safety rating, so it is suitable for bathroom use. It is not rated for wet or outdoor locations.
What's the warranty? 1-year warranty per the manufacturer.
Will this work on a sloped ceiling or angled wall? Yes - the fixture is rated for a 30-degree slope, which allows mounting on angled surfaces.
Ships from our warehouse in 1-4 Business Days