A 1-light bathroom vanity light with a brushed nickel finish and satin glass shade, sized for a single vanity in a bathroom or powder room.
The Mission collection pairs a clean, straight-lined backplate with a softly diffused satin glass shade, giving this vanity light a traditional look that works with both classic and transitional bathrooms. The brushed nickel finish has a low-sheen, slightly warm metallic tone that resists showing water spots better than polished chrome, and the satin glass softens the bulb glare so the light reads as even and comfortable rather than harsh.
Best for
- Bathrooms with a single 24-36 in vanity, mounted above the mirror or medicine cabinet
- Powder rooms and half-baths where one light is enough
- Hallways or stairwells used as a small wall accent light
- Pairing two or three across a longer double vanity
Not ideal for
- Large primary bathrooms that need light spread across a 60 in or wider double vanity - one fixture will leave the ends dim
- Rooms where you want a fully enclosed or sealed glass look; the satin glass shade is open at the bottom
- Low ceilings under 8 ft if you need the fixture to sit flush - this one projects 7.5 in from the wall
How bright is it?
Brightness depends on the bulb you install. This fixture takes one medium-base bulb up to 100W, which is roughly 1,600 lumens with a standard 100W incandescent - enough to light a single vanity area. Lumen output is not specified by the manufacturer because the bulb is not included.
Light color and feel
Color temperature is set by the bulb, not the fixture. For a bathroom vanity, a 2700K-3000K warm white bulb gives a flattering, slightly golden light that is kind to skin tones and wood finishes; 3500K-4000K reads cooler and brighter if you shave or apply makeup at the mirror. The satin glass diffuses the bulb so you get soft, even light instead of a hot spot.
Sizing and fit
Overall dimensions are 9.5 in high x 6.5 in long x 6 in wide, with a 4.5 in square backplate and 7.5 in from the top of the fixture to the mounting point. That footprint suits a single vanity or a narrow wall section. On a double vanity, space two or three of these evenly so the light overlaps.
Specifications
- Brushed nickel finish
- Satin glass shade
- 1 x 100W medium-base bulb (not included)
- 7.5 in from top of fixture to mounting
- Part of the Mission collection
- Overall dimensions: 9.5 in H x 6.5 in L x 6 in W
- Backplate dimensions: 4.5 in square
- Item weight: 5 lbs
- Designed for use in the United States only (110 volt wiring) and may not work properly outside the United States
Frequently asked
Is the bulb included? No. The fixture takes one medium-base bulb up to 100W, sold separately.
Is it dimmable, and what dimmer should I use? Dimmability depends on the bulb and wall dimmer you choose. Use a dimmable LED or incandescent bulb with a compatible dimmer; the fixture itself does not include a dimmer.
Can I install this in a bathroom or outdoors? It is intended for indoor bathroom vanity use. The manufacturer does not state a damp or wet location rating, so do not install it in a shower enclosure or outdoors.
What's the warranty? Warranty information is not specified by the manufacturer.
Will this work on a sloped ceiling? This is a wall-mounted vanity light, so ceiling slope does not apply. It mounts to a standard wall junction box using the 4.5 in square backplate.
Ships from our warehouse in 1-4 Business Days