An 18-inch linear LED wall sconce in gold, built for bathroom vanities, hallway accents, and portrait lighting where a slim ADA-compliant profile matters.
The Cubist sconce pairs a gold aluminum body with an acrylic diffuser in a clean, linear form. At 2.25 inches wide and 3.5 inches from the wall, it meets ADA standards, so it works in corridors and commercial spaces where projection is regulated. The integrated LED runs 30,000 average hours and can be mounted vertically or horizontally.
Best for
- Bathroom vanities where a slim, ADA-compliant sconce is required
- Hallways and stairwells as a linear accent light
- Portrait or artwork lighting in living rooms and galleries
- Damp locations such as bathrooms with normal humidity
Not ideal for
- Outdoor or covered patio use - rated for damp locations, not wet
- Large rooms needing primary illumination - 250 lumens is accent-level
- Spaces where you want a wide wash of light - this is a narrow linear fixture
How bright is it?
250 lumens - about as bright as a 25W incandescent bulb. It is an accent light for vanities, portraits, or hallways, not a primary room light.
Light color and feel
3000K warm white gives a soft, golden tone that flatters skin tones at a vanity. CRI 90 renders colors accurately. Dimmable with a 3-in-1 driver supporting Triac, ELV, or 0-10V dimming.
Sizing and fit
18 in L x 2.25 in W with a 3.5 in extension and a 2.25 x 2.25 in backplate. Mounts vertically or horizontally. The slim 3.5-inch projection suits narrow hallways and ADA-sensitive spaces.
Specifications
- Part of the Cubist Collection
- Finish: Gold
- Made of Aluminum, Acrylic
- (1) 7W DC Integrated Bulb
- Integrated
- Bulb Color Temp: 3000
- Bulb Average Hours: 30000
- Bulb Lumens: 250
- Bulb CRI: 90
- Input Voltage: 120-277
- Output Voltage: 24
- LT Type: LED
- Dimmable: 3-in-1: Triac, ELV, or 0-10V
- Length of Electrical Wire: 8 in
- ADA: Yes
- Light Direction: Omni
- Install Position: Vertical/Horizontal
- For Use in Damp Locations
- Safety Rating: CETLUS Listed
- Overall Dimensions: 18 in L x 2.25 in W
- Extension: 3.5 in
- Backplate Dimensions: 2.25 in W x 2.25 in H
- Item Weight: 2.68 lbs
Frequently asked
Is the bulb included? Yes - the 7W LED is integrated and not replaceable.
Is it dimmable, and what dimmer should I use? Yes, with a 3-in-1 driver that works with Triac, ELV, or 0-10V dimmers.
Can I install this in a bathroom or outdoors? Bathrooms yes - it is rated for damp locations. Outdoors no, it is not wet-rated.
What's the warranty? Warranty terms are not specified in the source data; confirm with the manufacturer.
Can it be mounted horizontally and vertically? Yes, the fixture supports both orientations.
Ships from our warehouse in 1-4 Business Days